Search Site

Breadboard Power Supply 3.3v and 5v USB or Wall Plug

Availability: In stock


Providing power to standard breadboard, this power supply module is a great way to power Raspberry Pi and Arduino circuits.

The module plugs directly into the power rails of your breadboard.

Each power rail pair can be set at either 3.3v or 5v. You can set each pair to different voltages or the same.

The third voltage point is pins on the top of the board, and can therefore be taken to any point via jump leads, this output is tied to the rail voltage

The spacing of the output pins allow you to hook this up to two or four seperate breadboards

The board is switched, and has an LED indication for On.

To power the board, you have two options, via USB from your PC, or via the 5.5/2.1mm barell jack.

This is a common size for typical "WallWart" power supplies, and the module will accept voltages from 6-12VDC.

On board voltage regulators keep your output voltage stable, and thermal cutouts protect against over temperature and short circuit.

The module is only 53 x 35mm yet can supply a massive 700mA.

The breadboard shown on the image is availble seperately, and is not included in this listing

Use spaces to separate tags. Use single quotes (') for phrases.


There are no product questions yet.

Ask a question and Give an answer. Help your fellow customer.

Ask Your Question

* Required Fields

Frequently bought together

Customers who bought this product also commonly purchased the following combination of items.

Customers Who Bought This Item Also Bought

Back to top