The Spark core is WiFi enabled, and can be supplied with an integrated "Chip" Antenna, or with a "UFL" socket to connect a remote antenna.
For Higher current and Voltage, there is an add-on Relay board available
The Spark Core is a complete Wi-Fi enabled development platform for creating connected devices with ease. The Spark Core IDE works with many Arduino examples and there have been libraries that are ported to the STM processor on board.
If you have used Arduino, you will be at home with the Spark Core
The Spark Core is small, low power, and easily connects with WiFi.
There's a backend website platform 'cloud' that will let you send and receive data, rather than having to access everything from your local network or trying to figure out how to tunnel into it, the Spark Core connects out to the Spark.io network for seamless connectivity.
You can always set up your own protocols if you want, but you don’t have to. And that’s kind of the point! The Spark Core ships hooked up to the cloud, so you can worry about your things and how they integrate, instead of worrying about getting the cloud to work.
The Spark Core is all you need to start tinkering with Web connected devices.
To integrate real world electrical items, (like lights) you will need to use the relay shield.
The relay shield allows control of upto 4 mains voltage level pieces of equipment
Questions:
There are no product questions yet.
Customers who bought this product also commonly purchased the following combination of items.
- This Item: Spark Core WiFi Developement Board with UFL socket
-
6.35mm 1/4" Mono Jack Plug Nickel Plated solder terminal Spring relief
-
10nF Ceramic Disc Capacitor
-
3.2768Mhz Crystal Through Hole
Pre-Order
- 47k 0.25W Carbon Film Resistor
-
Price for all: £38.58
