The DS18B20 is a very small thermometer which can be easily hooked into the Arduino MCU through any digital input.
The DS18B20 digital thermometer provides 9-bit to 12-bit Celsius temperature measurements.
It has an alarm function with non-volatile user programmable upper and lower trigger points.
The DS18B20 communicates over a 1-Wire bus that by definition requires only one data line (and ground) for communication with a central microprocessor.
Each DS18B20 has a unique 64-bit serial code, which allows multiple DS18B20s to function on the same 1-Wire bus. You can use one microprocessor to control many DS18B20s distributed over a large area.
- IC Output Type: Digital
- Sensing Accuracy Range: ± 0.5°C
- Sensing Temperature Min: -55°C
- Sensing Temperature Max: +125°C
- Supply Voltage Min: 3V
- Supply Voltage Max: 5.5V
- Sensor Case Style: TO-92
- No. of Pins: 3
- Operating Temperature Range: -55°C to +125°C
- Output Current: 4mA
- Resolution (Bits): 12bit
- Supply Current: 1mA
Questions:
There are no product questions yet.
Customers who bought this product also commonly purchased the following combination of items.
- This Item: Maxim Dallas DS18B20+ Digital Temperature Sensor TO92 -55' to +125'
-
LM3914 LED Bargraph Driver IC
-
16F627A I/P PIC microcontroller IC 18 pin DIL DIP18
-
MAX232AEPE +5V Multichannel RS-232 Driver/Receiver 16 pin DIL
-
24 Pin DIL socket Wide Profile
Pre-Order
-
Price for all: £16.01
