Lug sizes are designated by Cable CSA (the first number, mm2) and Mounting hole size(the second number, in mm)
This lug is designated 25-6 and is designed to fit 25mm cable and mount on a 6mm bolt
Please remeber that the cable is measured as a cross sectional area, not a diameter. If you are unsure, please contact us
Cembre lugs are manufactured from electrolytic copper tube.
The dimensions of the tube are designed to obtain the most efficient electrical conductivity and mechanical strength to resist vibration and pull out.
Cembre lugs are annealed to guarantee optimum ductility which is an absolute necessity for connectors which will have to withstand the severe deformation arising when compressed and any bending of the palm during installation.
In applications subject to vibration, lugs still have to provide a reliable connection and annealing plays a vital role in avoiding cracking or breaks between the barrel and palm.
The presence of an inspection hole facilitates full insertion of the conductor, whilst the barrel length has been designed to allow easy and accurate positioning of the dies during the crimping operation.
Lugs are electrolytically tinplated to avoid oxidation.
To allow correct termination, the lug should be crimped onto the cable with a suitable tool
Questions:
There are no product questions yet.
Customers who bought this product also commonly purchased the following combination of items.
- This Item: 25-6 Copper Tube Lug Cembre 25mm2 cable to M6 terminal
-
Preset Vertical Trimmer Potentiometer 1M0 (1 Mohms) Linear Track
-
Light Dependent Photo Resistor (LDR)
-
Wago DIN Rail Connector 4-conductor 2002-2207 TOPJOB S 2 decks Earth
Pre-Order
-
5 x 2 mm Rectangular Green LED Vf 2.2v If 20mA 20mcd Output Pack of 5
-
Price for all: £9.31
